Splash Design creëert, importeert en distribueert persoonlijke beschermingsmiddelen voor motorrijders.
MACNA Ultimax 2.0
- All seasons
- Direct laminate
- Easy Cuff™
Further development of our ultimate directly laminated jacket, developed for touring and adventurous riders in all conditions.
The Ultimax 2.0 is an adventurous all-season touring jacket meant for all riding conditions. The waterproof Raintex membrane is directly laminated – which prevents the outer layer from soaking up water and getting soggy and cold – and the thermal liner is detachable. Directly laminated garments also dry much faster compared to other waterproofing methods.
This jacket features a double front zip, with both zips being slightly off-centred and located behind each other, creating a zig-zag construction with the waterproof flap for increased waterproofness.
A deployable hood that’s worn underneath the helmet and lets you create a fully waterproof connection between your helmet and jacket is also present. The Storm Hood prevents water from entering the jacket via the collar.
The Ultimax 2.0 also features two waterproof Aqua Stop ventilation zips at the front, an air outlet at the back, and a connection zip at the back to connect it to your (Ultimax) pants.
Reflection is present at the sides in the form of discreet Side Eye™ accents. Critical areas are extra reinforced with synthetic nubuck; a leather fabric often used to reinforce the palms of gloves.
This jacket comes with our very own Easy Cuff™; a system that makes use of a zip – instead of loops and snaps – to keep everything in place. This nifty spec connects the detachable layers to each other and prevents your hand, wrist or watch from getting stuck when putting on or taking off your jacket.
A series of loops called the Electric Power Guide™ is present throughout the inside of the jacket. This enables you to run power cables through the sleeves with full freedom of movement and no bulk at the wrists.
In addition, this jacket is Thermax™ prepared, which means a heated Thermax™ jacket such as our Nucleo or Nuclea can be fitted inside.
Other in-house developed differentiators are the Quick Access Puller™ that enables quick and easy access to the inner chest pocket. The Coat Hanger™ at the back is durable as it is developed to actually carry the weight of a motorcycle jacket.
At the lower left arm we’ve fitted a Card Pocket in the outer shell to store an access card or other means of identification or payment to minimise time lost at mandatory stops such as tollbooths.
Both shoulders and elbows are protected by our own CE level 2 RISC™ protectors. This jacket is also prepared for numerous safety upgrades such as protectors for your back and chest, a high-viz vest that doesn’t interfere with the jacket, and a Vision 2C LED light which goes at the top of your back.
The Ultimax 2.0 is what we call rain riding gear!
Thermax™ Prepared
The motorcycle jacket is prepared for a Thermax™ jacket to be fitted inside after removing the thermal liner. A Thermax™ jacket is a separately wearable, electrically heated jacket that can also be fitted inside a motorcycle jacket.
Lees meer
Vision 2C LED light prepared
Visibility boost in the form of a secondary tail light, fixed high upon your back.
Vision Tech vest prepared
This garment is fitted with two buckles at the chest to make sure our Vision Tech vest stays in place and doesn't interfere.
Back Pocket
Large waterproof pocket at the lower back. Ideal for storing your membrane and/or liner.
Lees meer
Coat Hanger™
Durable coat hanger that's designed to carry the weight of a motorcycle jacket.
Lees meer
Electric Power Guide™
Electric Power Guide is a series of loops inside a MACNA motorcycle jacket that enable the separately available E.P.G. cable to be run on the outside of the removable thermal liner to power your gloves, offering full freedom of movement and no bulk at the wrists.
Lees meer
Dyna Cuff™
Softer, more dynamic cuff enables the sleeve to retract and adjust itself to the length of the wearer's arm. Great for riders who have short arms in relation to their bodies.
Lees meer
Easy Cuff™
Comfy zip at the cuff - instead of loops and snaps - that connects the detachable membrane to the outer shell. Prevents loose, floating layers and your hand or foot from getting stuck.
Lees meer
Ergo Pocket™
Ergonomically designed pockets between the back and sides of the jacket. The pockets are positioned in a way that enables easy access when reaching for one of them.
Raintex DL
The breathable and waterproof Raintex membrane is laminated directly against the outer shell, which prevents the garment from soaking up water and becoming cold and heavy. As a result, DL clothing also dries much faster.
Lees meer
RISC™ back protector prepared
The construction features a designated compartment on the inside that enables our RISC back protector to be placed.
Lees meer
RISC™ chest protector prepared
The construction is designed in a way that enables both parts of our RISC chest protector to be placed and connected easily before you zip up.
Lees meer
RISC™ knee/elbow protector (KE01, KE02, KE03)
Impact protector with a hollowed-out, hexagonal structure that absorbs and distributes impact forces. Comfort is guaranteed by its ergonomic design and breathability.
Lees meer
Storm Hood
A deployable hood that’s worn underneath the helmet and lets you create a fully waterproof connection between your helmet and jacket. Prevents water from entering the jacket via the collar.
Specificaties
Productinformatie
Brand:
MACNA
MACNA
More than 30 years ago, we invented a new production method to make gloves more affordably waterproof. After this success, we launched our first jacket with the razor-sharp price/quality ratio you have come to know us for. Since then, we have always focused on innovation in motorcycle gear to contribute to a more enjoyable riding experience. MACNA - That's what we call riding gear!
Comfort:
Waterproof
Ventilation zip chest
Ventilated
Detachable liner
Air outlet
Functionality:
Vision Tech vest prepared
Vision Tech vest prepared
This garment is fitted with two buckles at the chest to make sure our Vision Tech vest stays in place and doesn't interfere.
Vision 2C LED light prepared
Vision 2C LED light prepared
Visibility boost in the form of a secondary tail light, fixed high upon your back.
Thermax™ Prepared
Thermax™ Prepared
The motorcycle jacket is prepared for a Thermax™ jacket to be fitted inside after removing the thermal liner. A Thermax™ jacket is a separately wearable, electrically heated jacket that can also be fitted inside a motorcycle jacket.
Lees meer
Connects with pants
Connects with pants
Easily zip your pants to your jacket.Adjustable waist strap
Adjustable waist strap
Adjustable strap lower arm
Adjustable strap lower arm
Adjustable cuff
Adjustable cuff
Safety:
Reflection
Reflection
Reflective panels at front and back.Shoulder protection
Shoulder protection
The shoulders are reinforced and well protected.Elbow protection
Elbow protection
The elbow is reinforced and well protected.Prepared for chest protector
Prepared for chest protector
Place a chest protector in the designated compartment.Prepared for back protector
Prepared for back protector
Place a back protector in the designated compartment.Long connection zipper
Long connection zipper
Jacket and pants can be connected by means of a long connecting zip.Style:
Adventure - Tour
Suitable for:
Men
Technology:
Storm Hood
Storm Hood
A deployable hood that’s worn underneath the helmet and lets you create a fully waterproof connection between your helmet and jacket. Prevents water from entering the jacket via the collar.
RISC™ knee/elbow protector (KE01, KE02, KE03)
RISC™ knee/elbow protector (KE01, KE02, KE03)
Impact protector with a hollowed-out, hexagonal structure that absorbs and distributes impact forces. Comfort is guaranteed by its ergonomic design and breathability.
Lees meer
RISC™ chest protector prepared
RISC™ chest protector prepared
The construction is designed in a way that enables both parts of our RISC chest protector to be placed and connected easily before you zip up.
Lees meer
RISC™ back protector prepared
RISC™ back protector prepared
The construction features a designated compartment on the inside that enables our RISC back protector to be placed.
Lees meer
Raintex DL
Raintex DL
The breathable and waterproof Raintex membrane is laminated directly against the outer shell, which prevents the garment from soaking up water and becoming cold and heavy. As a result, DL clothing also dries much faster.
Lees meer
Ergo Pocket™
Ergo Pocket™
Ergonomically designed pockets between the back and sides of the jacket. The pockets are positioned in a way that enables easy access when reaching for one of them.
Easy Cuff™
Easy Cuff™
Comfy zip at the cuff - instead of loops and snaps - that connects the detachable membrane to the outer shell. Prevents loose, floating layers and your hand or foot from getting stuck.
Lees meer
Quick Access Puller™
Quick Access Puller™
Extended cord, fixed to the inner pocket; enables quick and easy access and makes riding just that bit easier. Lees meerDyna Cuff™
Dyna Cuff™
Softer, more dynamic cuff enables the sleeve to retract and adjust itself to the length of the wearer's arm. Great for riders who have short arms in relation to their bodies.
Lees meer
Electric Power Guide™
Electric Power Guide™
Electric Power Guide is a series of loops inside a MACNA motorcycle jacket that enable the separately available E.P.G. cable to be run on the outside of the removable thermal liner to power your gloves, offering full freedom of movement and no bulk at the wrists.
Lees meer
Coat Hanger™
Coat Hanger™
Durable coat hanger that's designed to carry the weight of a motorcycle jacket.
Lees meer
Back Pocket
Back Pocket
Large waterproof pocket at the lower back. Ideal for storing your membrane and/or liner.
Lees meer
Weather type:
Mild
Cold
All weather types
Ventilation:
Yes
Technisch
Homologation:
RISC CE Level 2 shoulder protection
RISC CE Level 2 shoulder protection
RISC CE Level 2 elbow protection
RISC CE Level 2 elbow protection
Class AA
Class AA
Materials:
Synthetic nubuck
Synthetic nubuck
Brushed synthetic leather which is soft, flexible, breathable and has the look of real suede.Soft flex DL
Soft flex DL
Stretch fabric with ripstop weave and directly laminated membrane. The fabric is flexable and waterproof.
Repelex DL
Repelex DL
3-layer shell fabric with membrane and smooth surface. The fabric is waterproof, windproof, breathable, strong and lightweight.Standaard
Product code:
165.3620